Rule Aerator Pump 700 GPH

[4fish4]

I notices that my Rule Aerator Pump 700 GPH (front pump to empty ballast ) is crack. Can someone tell me is this is the right part before I order a new one

http://www.jamestowndistributors.com/userportal/show_product.do?pid=43200&familyName=Rule+Non-Automatic+700+GPH+Bilge+Pump#1466914670

[jmvotto]

nope that is a bilge pump Go to walmart and get a tsunami 800 gph or your dealer may have some rule pumps the left over.

or try this site if you want rule.

http://www.cgedwards.com/Rule/rule03.html

[Rgar]

That is not the right pump. That is a bilge pump. You need a pump that has an inlet and 3/4" outlet. Have a look at the 800 gph Tsunami pumps on wakemakers.com. They are cheap and decent replacements for that pump.

[4fish4]

so this should do the job, Right ?
http://www.wakemakers.com/attwood-tsunami-ballast-pump-800.html

[Rgar]

Yeah that's what I used to replace the stock 700gph pumps. You may have to order a straight connection. The elbow style that it comes with did not work in my 03 LSV.

[4fish4]

Thank you guys

[murraymoomba]

Did this pump come with the same type plug in?




so this should do the job, Right ?
http://www.wakemakers.com/attwood-tsunami-ballast-pump-800.html

[jmvotto]

Did this pump come with the same type plug in?

No you can splice the plug off the rule or order te deutsch plugs from batts racing and solder yourself.

http://www.deutschconnector.com/products/deutsch_dt_series_connectors/

[squeeg333]

I think I might have the same issue with my ski locker drain pump - I always seem to have water in the ski locker after using it and the IBS.

Do you guys know if the Tsunami will work with the stock aluminum Rule pump mount that comes with these boats? I'd like to swap this pump out today if possible, but the only place I've found for the Tsunami mount is Wakemakers.

[mnpracing]

I think I might have the same issue with my ski locker drain pump - I always seem to have water in the ski locker after using it and the IBS.

Do you guys know if the Tsunami will work with the stock aluminum Rule pump mount that comes with these boats? I'd like to swap this pump out today if possible, but the only place I've found for the Tsunami mount is Wakemakers.

It will drain better without the mount, just let it lay in the locker.

[squeeg333]

Well ya know, that's a great point! Thanks!!

[jmvotto]

It should fit. As sated try without