Need a little help wiring speakers to amps...

[greenhead84]

So I finally gathered all the amps and speakers I am going to use.

I have two exile sx65Q surf speakers
Rated at 125W RMS/250W Max 4 ohms

I have four exile sx65m cabin speakers
Rated at 100W RMS/250W Max 4 ohms

I have a Kicker 450.2 amp
4 ohms: 150 watts x 2 chan.
2 ohms: 225 watts x 2 chan.
Bridged, 4 ohms: 450 watts x 1 chan.

I have a Boston Acoustics gt-2200
4 ohms: 200 watts x 2 chan.
2 ohms: 350 watts x 2 chan.
Bridged, 4 ohms: 700 watts x 1 chan.
Bridged, 2 ohms: 900 watts x 1 chan.

What would be the best and most efficient way to hook these speakers up to these amps(a diagram would be awesome).
Thanks for all the help y'all have given!!

[sandm]

based on what you have, I'd wire the tower surf speakers to the boston amp. it's pushing the most to a 4ohm load, wire it as a standard 2ch 2speaker setup.

run the 4 exiles to the kicker amp and run it as 2 speakers per channel dropped to a 2ohm load. wire them in parallel connecting the 2 positive leads per side to the amps positive channel and same with the negative leads on each side..

my .02 fwiw..

[greenhead84]

Like this for the cabin speakers?

http://i1079.photobucket.com/albums/w505/greenhead84/image34.gif

[KG's Supra24]

based on what you have, I'd wire the tower surf speakers to the boston amp. it's pushing the most to a 4ohm load, wire it as a standard 2ch 2speaker setup.

run the 4 exiles to the kicker amp and run it as 2 speakers per channel dropped to a 2ohm load. wire them in parallel connecting the 2 positive leads per side to the amps positive channel and same with the negative leads on each side..

my .02 fwiw..

LOL, same recommendation I gave on the Supra site. That's 2 ... 3rd makes it true.

[greenhead84]

Thanks, i figured i would spread the question around...