View Full Version : ProMariner charger?
Is anybody running a extension cord on their charging system. And do you know how to undo the inline fuse on the power wire?? I have the proSport12 dual charger. I didnt fully understand the instructions on using a long power line. I want to run the extension cable from the front to the rear to the boat and mount a plug-in in the rear fat sac holder. Thanks guys. Jet
http://www.starmarinedepot.com/ProMariner+ProSport+12+Gen+2+Battery+Charger.html
KG's Supra24
05-10-2012, 09:52 PM
Pretty sure Dusty has it setup that way.
Sent from my DROID RAZR using Tapatalk
dusty2221
05-11-2012, 12:15 AM
Jet, call me of you need to, I don't mind lending a hand.
Ive done it with other chargers. I used outdoor grade 12ga 3-conductor cabling. Cut the plug of the chargers power cable, spliced and heat-shrink the extension cable to the chargers cable, then connected the other end of the extension cable to the charger inlet receptacle.
For the fuse holder, push the halves together a little, then twist 45* and it should unlock and come apart.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.