View Full Version : Super dumb question

04-27-2012, 01:07 PM
Ok...does the backseat of my LS come off? I have lifted on it a few times but it feels really "attached"?? I wanna see what's doin' under there.

ian ashton
04-27-2012, 01:37 PM
Try a bigger hammer, or in this case pry bar.

04-27-2012, 01:47 PM
Thanks! I guess that means there is no access...

04-27-2012, 02:02 PM
Chawk all I can do here is chuckle, get up off the floor, and chuckle some more!! I'm sorry I'm not familiar with your year model and make but between the title name and the simple answer given I'm bout to fart over laughter.

04-27-2012, 02:18 PM
:| please don't fart on my behalf... I'll just sit here feeling stupid

04-27-2012, 02:22 PM
UH.......Owners Manual? I feel for ya brother. Dont let these guys get you Down.....hell I was laughing at their comments.....

04-27-2012, 02:26 PM
I have the manual at home... I will look later I reckon. I chuckled too! Smart Azzes

04-27-2012, 02:32 PM
Im still Laughing. Thats Funny stuff

ian ashton
04-27-2012, 03:37 PM
Here is the owners manual;

From that, it looks like the ballast is under the seat;

04-27-2012, 04:07 PM
Ok... thanks, I see the outback seat folds up... didn't say the mobius one did though.

04-27-2012, 04:46 PM
On the 09' the seat comes off and the ballast tanks are underneath. First time I took it off it was difficult. Not the easiest to put back on. Works better with 2 people.

04-27-2012, 04:54 PM
Thank you for the clear consise answer... 11 posts in :) Yep, it's Friday on the old Moomba board!

04-27-2012, 05:17 PM
07 slides out, but is tight.

04-27-2012, 05:51 PM
Cool, I will try both, I bet it slides cause I have tried pulling up with no success.

04-27-2012, 08:21 PM
Sounds like you might need a degree in engineering to get this one figured out Chawk wow!

Sent from my iPhone's cooler than your droid utilizing Tapatalk

04-27-2012, 11:15 PM
did u ever try bending down and just looking under the seat? :)
Just a thought Chawk.

04-27-2012, 11:39 PM
hot dam!

Sent from my iPhone's cooler than your droid utilizing Tapatalk

04-28-2012, 03:30 PM
You have to lift slightly and pull out. There are 2 hockey puck like things that sit in notches in the hard ballast tanks

I am here: http://tapatalk.com/map.php?s4iwf5

04-28-2012, 03:55 PM
I find the best way to remove the seat is with 2 people. Have one person lift the seat in the center allowing the seat to curve 4-5" then the second person pull up on one of the ends as you twist out. Be extremely careful of you speaker cover as it will come in contact with the seat and break the speaker cover. To install the seat slide one end in place have one person to pull up on center as the other person pushes down and maneuvers the seat in place. It is tight and will feel like you are going break the seat, but it will flex a lot.

04-30-2012, 08:56 AM
Got it... as for bending down and looking under... uhh, no, didn't try that.