helix_rider
06-06-2005, 02:34 PM
Okay all you helpful Moomba owners, I call on your wisdom again.
1. Not knowing what they were, someone twirled the knobs below my speedometer/rpm gauges. This, of course, messed up my speed reading. Perfect pass still read correct (confirmed with a GPS) and I used the 'left' knob to dial in the speedometer perfectly. What is the 'right' knob for? It did nothing no matter which way I spun it. I guess I thought it was the 2nd speedo that the manual talked about...?
2. While I'm on the speed thing, my perfect pass goes nutso sometimes on turns, cranking the speed up to 25 mph or higher (normally going 22). I thought it was supposed to keep everything steady? It has been so bad that we revert to driving manually...so much for the 'marriage saver'.
3. Do any of you have Straightline launch bags in your boats? I have been having a heck of a time keeping the hoses attached, they will pop off so easily, and the guy at Straightline pretty much said that the threads on the bags were made that way?!@?!?!
4. Finally, my 1 month old trailer is starting to rust, especially where the axle/wheel is located. What do you guys do to help this rusting issue...
Thanks for the tips.
Loren
1. Not knowing what they were, someone twirled the knobs below my speedometer/rpm gauges. This, of course, messed up my speed reading. Perfect pass still read correct (confirmed with a GPS) and I used the 'left' knob to dial in the speedometer perfectly. What is the 'right' knob for? It did nothing no matter which way I spun it. I guess I thought it was the 2nd speedo that the manual talked about...?
2. While I'm on the speed thing, my perfect pass goes nutso sometimes on turns, cranking the speed up to 25 mph or higher (normally going 22). I thought it was supposed to keep everything steady? It has been so bad that we revert to driving manually...so much for the 'marriage saver'.
3. Do any of you have Straightline launch bags in your boats? I have been having a heck of a time keeping the hoses attached, they will pop off so easily, and the guy at Straightline pretty much said that the threads on the bags were made that way?!@?!?!
4. Finally, my 1 month old trailer is starting to rust, especially where the axle/wheel is located. What do you guys do to help this rusting issue...
Thanks for the tips.
Loren