Chrome Letter Dimensions?

[eblom]

Can anybody that has the chrome moomba logo take a quick measurement of the height and width of the side and transom logos? I am also looking for the measurements of the chrome "mobius lsv" as well.... Thank you!

[eblom]

Oops... Should have been Chrome Letter Dimensions... Can anybody help?

[kaneboats]

Come on fellas! Please help out here. It would be nice if somebody would measure the height and width of a letter and the length of the whole "MOOMBA" logo. My closest dealer is 2 hours away. Who has one of these out in the garage? Buelller? Anyone?

[yz 2smoke]

I will get you guys some measurements when I get home from work today.

[eblom]

Thank you! It looks like wolfeman has the side logo covered on this thread
https://forum.moomba.com/showthread.php?16566-Opinions-on-decal-updates&p=160132#post160132

Could you measure up the transom logo?

[wolfeman131]

sorry, couldn't find this thread when I posted under the other:

Overall length of lettering with aprox 1” between letters is 66” long
“M” is 5” tall and 11” wide
“O” is 4 ¾” tall and 9 ½” wide
“B” is 4 ½” tall and 10 ½” wide
“A” is 4 ½” tall and 10” wide

I rec'd the above from my dealer and have asked for the transom also. I'll post when/if I get that info.

[eblom]

Wolfeman got the transom logo measurements too... Thank you! Any chance smoke could measure up the "Mobius LSV" on the side? Or is that just getting greedy lol?

[wolfeman131]

Yeah, getting greedy. I can't use up all my favors at the dealership & I think they're gone for the day.

[eblom]

Drew you have done more than enough... I was checking to see if yz 2smoke could hook me up... Thank you for tracling those down....

[yz 2smoke]

The letters are tilted to the right if that makes since, kind like a board on top and then pushed the board to the right. My camera is dead so I will add some pics in about an hr. I see why you guys dont already have this info from the guys that have them.

M 3.5" wide / 1.5" tall
O 3" wide / 1.5" tall
B 2.5" wide at the fat part of the lower b upper part of the B has line thing that comes off and it is 3.5 wide / 1.5 tall
I 7/16" wide / 1.5" tall
U 3" wide / 1.5 tall
S 2 7/16" wide / 1.5 tall

L 2' wide bottom of L / 1 3/8 tall
S 2.5'' wide in the middle of the S / 1 3/8" tall
V 2.5 wide at top of the V and 3/8 at the bottom

I will add pictures with a tape next to the letters at different locations on each letter.

[yz 2smoke]

Wait before you use these measurements. I want to add pictures...the letters are a pain in the arse to measure. My camera s charging now.

[yz 2smoke]

The pictures didn't turn out, too dark in my garage and the flash was way to bright.

I did find my real tape so here are the measurements

M 3.5 wide - 1.5 tall
O 3 wide - 1.5 tall
B 3 wide - 1.5 tall
I 3/4 wide - 1.5 tall
U 3 wide - 1.5 tall
S 2 3/4 wide (middle of S) -1.5 tall

L 1 1/8 at the bottom of the L - 1 9/16 tall
S 2 1/2 wide in the midle of the S - 1 9/16 tall
V 2 7/8 at top and 9/16 at the bottom -1 9/16 tall

[eblom]

Thank You!