Help Moombadaze! HU stuck in Demo mode.

[kaneboats]

Daze can't post at work right now but he's having a common problem. He has the Kenwood KDC-MP2035 (I think) that was the stock HU in 2008. It is stuck in "Demo" mode so it won't display the "Aux" input. I remember from experience that the description in the manual does not work to get it out of demo mode. Mmandley explained what to do in a PM last year and later posted it for someone else but I can't find the PM or the post. Please respond and help a brutha out. Thanks!

[lsvboombox]

http://www.masterspas.com/manuals_av/Kenwood_KDC-MP2035.pdf

check page 22

[kaneboats]

Thanks for the link but I have the manual right here. The method described does not work on these units.

[lsvboombox]

found this comment

The instruction manual is a little confusing and leaves a little bit out. Ex.-you need to press the bass boost button before you can exit Demo mode

[moombadaze]

pretty sure the bass boost was not on, wont be able to look till tomorrow night

[moombadaze]

ok, I got it, not sure how at this point, but it displays aux on the screen

[kaneboats]

BINGO! When Mike gets back he'll put up the fool proof (read: Kane proof) method of fixing this so you can be sure you're golden.