Cachais asked for this picture

[kaneboats]

Don't know where the thread went but I think this is the pic you asked for.

[Boonejeepin]

Is that a modified factory wakeboard rack? I have 2 factory wakeboard racks and I am picking up my first wakesurf soon and will need someplace to put it.

[kaneboats]

I think that was a replacement rack set up for surf. It had no where to attach the bungee so the owner make the little clips and installed them behind/beneath the rack.

[Martin Jr]

The owners name is Martin Ed.

these racks ony cost me $70 for the pair (sans C-clamps) and will hold two inland surfer boards at once.

I love 'em. They are on both sides of the tower

[Boonejeepin]

Cool. I thought you may have been an artist with a band saw and a dremel. :)

[Martin Jr]

nah, I'm an artist with a hammer and an anvil made from a hunk of 2 X 4

[cachais]

That's exactly what I was looking for. Martin can you please repost the instruction on how you made that clamp that attaches to the bungee. I am trying to do the same. You don't have a extra clamps you'd be willing to sell do you?

[Martin Jr]

it's actually pretty simple to make. look at the first photo and turn your head counter clockwise


cut a length of 1" wide aluminum, drill holes that match the clamp mounting screws, sandwich the aluminum between the clamp and the rack and then bend the top into a loop.

Contact Cody at XTP/Monster Tower. He will sell you clamps.

[jester]

Ed, Thanks for the info. I will have to make this soon.

[cachais]

I have the clamps so am good to go there, but have to find the 1" aluminum. The pictures are a huge help. Thanks for the info!