Depth Finder gauge stopped working

[wayne_v]

I have a 2006 Moomba Mobius and a couple of weeks ago the depth finder gauge stopped working. The gauge is completely blank, so it either lost power or stopped working all together. Is there a fuse I should check somewhere, or is there something else I should check?

[mmandley]

The guage isnt fused on a deddicated line but you can look under the dash and follow the wires. One will go under the floor and it goes back to the puck for the depth. The other should goto the wire loom and head to the fuse panel but ti will be merged with some other low amperage item. I would start with making sure the guage has voltage, then make sure its still grounded and if both these are present the display might have gone out. Need a new guage

[zroutt]

I am in a similar situation only mine just always blinks 0.5? Time for a new guage or check the puck?