PDA

View Full Version : Prop puller doesn't fit



99 boomer
04-25-2005, 01:39 PM
I have a 99 Boomerang and bought a up to 1-1/8' pro- puller that does not fit around the shaft. How can this be as i thought it had a 1" shaft? Any suggestions?


Thanks

jburnside
04-25-2005, 04:27 PM
Is it possible to send the puller back? Did you buy the puller for a 3 blade prop or a 4 blade prop. I believe they are different.

99 boomer
04-25-2005, 04:35 PM
i bought a c clamp style that works for both as i'm replacing the 3 blade with a 4 blade.


thanks


just measure the clamp and it is a 1 - 1/8th inch opening

Brian Raymond
04-25-2005, 11:01 PM
OJ, the prop. manufacturer for Skiers Choice, has a puller that works on all inboards. You can also get a full kit, which includes the puller, proper wrenches, and a spare prop. all in a hard plastic case. For more info. you can contact them, or contact; [email protected]. Brian Raymond