View Full Version : new to moomba-flush the engine
radyp
08-13-2011, 12:21 AM
Hi everyone. I have just purchased a 2004 Moomba outback LS and can't figure it out where to conect my garden hose. I purchased the boat on auction and don't have any manuals or instructions from the previous owner. I want to try the engine in front of my garage first. Thank a lot for your reply!!!
Boonejeepin
08-13-2011, 01:12 AM
You will need to buy a fake-a-lake or a clone. Basically a plunger with a water connection and an extendable pole. It wedges between the boat and the ground over he sea water intake grate under the boat.
Or.... You could ad a perko flush kit. I don't have one so I cannot comment on the quality of that unit or how well it works.
bkearney
08-13-2011, 08:42 AM
I just built one myself. I was pointed to this thread:
https://forum.moomba.com/showthread.php?t=9962&highlight=plunger
-- bk
wolfeman131
08-13-2011, 08:45 AM
Go to Moomba.com and under "About Moomba" you will find "Archives" which will allow you to find the owner's manual for your boat. Or, use the link below:
http://www.moomba.com/archive/#
Have fun with your new toy & post up some pics!
NCSUmoomba
08-14-2011, 02:39 PM
The engine owners manual is also available on Indmar's website. It has more engine specific information.
deepcove
08-17-2011, 11:35 PM
The Perko flush kit is the way to go.....they work great.
supraboard
08-18-2011, 11:50 AM
If the boat has a water strainer you can pull that hose off and stick a hose in and run that way. We just put a flush kit using a plastic fitting and high pressure hose and it runs about $200 installed, fake a lake is a cheaper option.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.