PDA

View Full Version : Vobration noise



jgilder
06-26-2011, 09:03 PM
I recently purchased a 2008 LSV and just took the boat out for the first time this weekend. When driving at 10 - 20 mph I noticed a vibration / noise coming from about 1.5 - 2 feet in front of the vdrive unit. Is this common for this type of boat. This is my first inboard boat.

The noise does not sound mechanical but more like it is coming from the hull of the boat. Not sure if it is related to how everything is mounted or what. The sound seems to be coming from under the two deck panels in the floor of the boat. I believe they are above the gas tank. Can someone provide me some insight into what the noise may be. Thanks!

04OUTBACK
06-26-2011, 09:46 PM
What prop do you have?
If it is OJ 14.25x14... that's probably the culprit..

do some searches on here..

Is it a growl? fine vibrations... not real coarse? probably the prop..

Many of us have been switching to the ACME props for this reason..
Acme 1235, 1433 and 1847 ( i just put the 1847 on my 06 LSV) major reduction in vibration..

check a few things.. look at prop for any dings, etc.... eye the shaft to make sure it is not bent any..

only oddity is you mention 1.5-2' in FRONT of the V Drive unit.. hmmm


There are several threads on the OJ Prop.. Eric from OJ chimed in for a bit. says something about the prop needing to be cut down to 14x14 and recupped due to its fit on the LSV hull.. I take issue with that ... since it was the factory upgrade prop..

by your description, i am curious if you took the boat on a test drive? did it make vibration then? if no test drive, ask the prev owner if you can..

where are you located?

WElcome to the forum

rdlangston13
06-26-2011, 09:55 PM
my 08 lsv has the oj wakeboard prop and has the same issue. as soon as i can come up with 500 bucks i will be getting an acme 1847

jpetty3023
06-27-2011, 01:18 AM
Welcome to the forum, post some pics of your lsv

ejojprop
06-29-2011, 09:48 AM
The reduction of diameter, from 14.25 to 14 will help with the noise, 2 of the 3 Acme props mentioned are 14". We also offer the same 14 X 14 and 14 X 14.5 for the LSV.

myster
06-29-2011, 09:58 AM
Hey Eric, is there somewhere in Ontario Canada, specifically the Ottawa area, where i could get prop repair that you know of??

ejojprop
06-29-2011, 10:03 AM
Hey Eric, is there somewhere in Ontario Canada, specifically the Ottawa area, where i could get prop repair that you know of??

Not familar with any shops there, sorry.

Gottop69
06-29-2011, 10:22 AM
My Mobius Lsv did that too till I had the prop redone.. Now is is smooth..

Oh and welcome to the forums.. We do need pics though

deafgoose
06-29-2011, 11:47 AM
Hey Eric, is there somewhere in Ontario Canada, specifically the Ottawa area, where i could get prop repair that you know of??

I had my prop done in at prop shop in Kingston and they took 6 hours to make the prop even worse than what it was when I dropped it off.

I then sent it to Kawartha Prop Repair and they did a perfect job.

http://www.buckhornyachtharbour.com/prop.php

You can meet the mobile van in the parking lot at Hurst Marina to give them the prop, then you can meet them again at the same location 7 days later and they dont charge for shipping! :)

deafgoose
06-29-2011, 11:49 AM
The reduction of diameter, from 14.25 to 14 will help with the noise, 2 of the 3 Acme props mentioned are 14". We also offer the same 14 X 14 and 14 X 14.5 for the LSV.

I would discontinue that 14.25 prop ASAP. It really does give the OJ brand a bad name.

I absolutely hate my OJ prop and can't wait to upgrade to an ACME.

sandm
06-29-2011, 12:04 PM
acme was one of the best uprgrades on the boat.
vibrations gone..

ejojprop
06-29-2011, 12:28 PM
I would discontinue that 14.25 prop ASAP. It really does give the OJ brand a bad name.

I absolutely hate my OJ prop and can't wait to upgrade to an ACME.

The same sizes 14.25 X 14.5 and 14.25 X 14 seem to work very well on most other boats, no complaints of noise on the other models. We run the larger diameter 14.75 X 13 diameter props on the Supra's and other brads with no issues.

loudsubz
07-02-2011, 10:57 PM
I have a similar vibration issue too but I have the acme prop and have always had it, and I have always had the vibration noise from day 1 buying the boat brand new. It only happens on certain speeds and usually when getting on plan or with a heavy load.

Morobeachbum
07-31-2018, 08:59 PM
I have the same issue was you ever able to resolve i. Same noise location also is your noise continuous