View Full Version : Outback V Bimini Mod - Short Rear Poles

05-25-2011, 12:16 PM
I finally got my bimini mod done. I think it tuned out pretty good.


The tubes are 2 1/2" long. I don't own a fancy crimper, so I used #8 stainless screws. I drilled and tapped holes for the screws in the tower.


I bought the rail mount hinges from Gander Mountain / Overtons and modified them.


I placed a sheet of 40 grit sand paper around a 1 1/4" piece of PVC pipe. The O.D. of the pipe measures about 1 5/8". I rough sanded until I got close, and finished up with some fine sand paper. I cleaned the burrs with a knife.


The nice thing about it is that I can leave the bimini fully attached, and still fold my tower forward.

05-25-2011, 12:35 PM
I don't get it.

What is the advantage to this mod?

05-25-2011, 01:07 PM
No rear straps, no flopping around bimini, two hands to put cover on, and head protection from my future Exiles.

05-25-2011, 02:12 PM
Awesome! Do I see a mod front poles in the near future?

I too despise straps on the bimini, well done Sir, well done indeed!

05-25-2011, 02:22 PM
Nice! Great idea molding the brace points to fit tthe tower.

05-25-2011, 03:19 PM
I competely forgot about those straps. :)

My boat has been in storage since October so I almost forget what she looks like. lol

05-25-2011, 06:43 PM
Great idea! I may have to copy this at some point.