View Full Version : IBS switches electrical gurus

05-14-2011, 07:30 AM
Help, I wired up some deutsch splitters to control both fill pumps. (below on this thread on blue tarp). I left the G1 wiring in place on the dash and added the G111 wiring in below the trottle last year, now i am using the old G1 wiring for a bow sac.

??? both pumps work when when using the fill from any of the switches . When i use the fill switch on ay of the g111 panel the fill light illumintes on the g1 on the dash??? no lights the other way g1 fill lights on, no lights on g111 panel .

Looks like i am getting a back flow electrical signal from the g111 panel to the g1 switch

any thoughts on this would be apprciate



05-14-2011, 08:26 AM
If you wired the G3 into any of the same pumps, or fuse panel area, or have any connections of it to any part of the G1 when its active it will activate both systes.

You have to run the G1 completly seperate from the G3 if you want it to act like a 4th Switch.

The G3 is daisy chained for power and ground but its still seperate switches.

My guess is you have the G1 and the G3 both connected to the main Rule pump and thats why your seeing them both light up.

05-14-2011, 02:02 PM
Thanks Mike. Looks like the light is something i will just have to deal with since i did connect the fill wiring from both.

Hopefully it won't hurt anything...