PDA

View Full Version : Steering wheel



jmvotto
04-14-2011, 11:06 PM
Anybody know if this will fit our moombas?

http://cgi.ebay.com/ebaymotors/Folletto-Series-Boat-Marine-Steering-Wheel-14-18-dia-_W0QQcmdZViewItemQQhashZitem3a6206b635QQitemZ25075 2710197QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear#ht_5 95wt_722

jmvotto
04-15-2011, 10:47 AM
anyone know if the extra diameter would be a problem?

first one ( looks like the moomba wheel) anyone know the manufacturer.
13.78" Wheel Diameter
3/4" Tapered Hub
Aluminum Spoke


second two
14.18" Wheel Diameter
3/4" Tapered Hub
Aluminum Spoke

jmvotto
04-15-2011, 03:58 PM
Bueller???? anyone Bueller:confused:

dusty2221
04-15-2011, 04:07 PM
Go for it, then report back!

Sometimes it's fun to be the guinea pig!

kaneboats
04-15-2011, 04:10 PM
Did you try calling them to ask what it fits?

I think Todd (11OutbackV) replaced his wheel with that blue thing. He may have some insight. The only other one I remember was Sled, but he just went to a Supra wheel so it's the same.

c.rix
04-15-2011, 04:16 PM
Did you try calling them to ask what it fits?

I think Todd (11OutbackV) replaced his wheel with that blue thing. He may have some insight. The only other one I remember was Sled, but he just went to a Supra wheel so it's the same.

sled :(

jmvotto
04-15-2011, 04:40 PM
sled :(

poor sled, we miss him..
probably watching periodically from a far.

Razz and cab did the same thing upgraded to the supra. Is this the same company that makes the moomba SW?

11 Outback V
04-15-2011, 05:35 PM
MOST aftermarket steering wheels come w an adapter that should work with what you have. My adapter worked and all I had to get was shorter bolts to make it work. Other than that it was a direct replacement.

Razzman
04-15-2011, 05:46 PM
Our steering wheels have the marine spline setup, not the automotive taper fit. You'll need a splined adapter to do it, that is as long as the hole pattern on the wheel matches up to the holes on the splined adapter. There are many different hole patterns so make ABSOLUTELY sure the patterns are the same.

Razzman
04-15-2011, 05:49 PM
Another thing, 14" is a big wheel and when lowered into position might hit your leg, etc. Personally I wouldn't go bigger than 13".

11 Outback V
04-15-2011, 06:23 PM
I used the splined factory plate w the adapter that came with the wheel and it worked fine.

jmvotto
04-15-2011, 09:04 PM
Another thing, 14" is a big wheel and when lowered into position might hit your leg, etc. Personally I wouldn't go bigger than 13".

What size s the moomba or supra stock wheel?

cab13367
04-16-2011, 12:28 AM
What size s the moomba or supra stock wheel?

Hey Joe,

The Supra wheel is 13.5' diameter. This is the wheel:

http://www.summitracing.com/parts/GRT-457-1/

If you were to go this route, you will also need this hub:

http://www.summitracing.com/parts/GRT-3656-1/

Let us know what you decide on.

Al

jmvotto
04-16-2011, 06:41 AM
Al, that's what I was looking for but came across the others, look pretty cool but as razz said fairly big.

Thanks,

I will let you know.