View Full Version : Windshield frame peeling

01-27-2011, 08:14 AM
whats the fix for something like this? you can see the paint is peeling off on the part for the drivers glass

this photo is not my boat but its doing the same thing

01-27-2011, 09:57 AM
I seen other post concerning this and they were painting, I want to say there is a can spray paint that is a perfect match available at autozone,advance auto and such.

01-27-2011, 10:27 AM
I'll get the specifics tonight but it's just duplicolor wheel coating (spray paint).

01-27-2011, 10:37 AM
Did anyone notice the huge gap between the walk thru windshield and the driver's side windshield, especially at the base?

KG's Supra24
01-27-2011, 10:54 AM
You could do some kind of wrap (sticker) that matches the color of the boat. Paint might be easier.

When i got the letters added to my boat I had them do the chrome stripe on mine red and i think it cost about $40. It would be a little trickier with the piece you are pointing out but could probably still be done.


01-27-2011, 12:23 PM
Thats my boat! It's kinda wierd that it's peeling there and where i put the mirror looks perfect. I'm interested cause I want to get it looking good again. And there is kind of a big gap at the bottom of the windshield. The bottom thing that you turn so the window can't open doesnt even touch the other side of the wind shield. It bothers me but I feel like you would have to change the angle of the opening window and then it would look off compared to the other two windshield pieces so I just live with it.

01-27-2011, 12:35 PM
Mine is doing the same thing and it started with people wearing Rings i think and walking back and forth from the bow.

Newty took his winshield off and then apart because he was retinting his windshield last summer and while it was apart he sanded and repainted the entire thing. I am thinking of doing this as well.

Just not sure yet.

You could do a sticker type repair and as long as its flexable you just use soaper water to apply it with no bubbles and then use a heat gun or dryer to make it burn all the water out.

01-27-2011, 12:50 PM
bzubke1--sorry about borrowing your photo but it was perfect for my concern

01-27-2011, 02:39 PM
No problems. Use all you like.

01-27-2011, 03:37 PM
Here we go. I thought this had come up before... Part numbers included as well: https://forum.moomba.com/showthread.php?t=12197

01-27-2011, 05:33 PM
Heres the link to my paint/tint project. Its really easy. I've had zero chipping or peeling since the repaint. But then again I lightly sanded the surface before I painted.


01-27-2011, 08:09 PM
Newty, thanks for link, do you by any chance still have a can of the paint. would like to know the exact color you used.

that boat of yours is still boat porn

01-27-2011, 08:35 PM
Newty, thanks for link, do you by any chance still have a can of the paint. would like to know the exact color you used.

that boat of yours is still boat porn

Look in his thread second set of pictures hes got a pic of the can

01-27-2011, 08:37 PM
LOL good to to know Daze... Good to know.

I think its the HWP105 Bronze.

Heres the link with a little how-to. Hope that helps brutha!
You can always fly me out and I can do it for you! I could use a little Florida sun about now, as my skin is a light shade of blue.
I work cheap, beer and surf sets!:p

01-27-2011, 08:45 PM
I've got beer but just not enough coin to fly ya down. Bummer as your work is pimpin-well except for that little steering wheel snafoo. :p

enjoy those speakers-someday I'll be rocking them too

01-27-2011, 11:33 PM
You call it snafoo, I call it thinking outside the box! When that knob comes standard on all wake boats just remember who was one of the pioneers!

BTW the tower speakers are going up for sale if your interested.
Almost free for you!:p

Included are totally rad covers, hand crafted by yours truley!