View Full Version : Flush pro
01-07-2011, 05:15 PM
I'm thinking about putting a flush pro kit on my boat. Moomba dealer said it might not fit on a moomba outback v. He said the line was not long enough from the hull to the bend going up to the v-drive.
Does anyone have one on theirs? If so did it fit in there okay?
01-07-2011, 10:35 PM
Most i have seen are installed are after the vdrive. I personally use a hose I made, when needing to flush just pull the hose off the inlet of the vdrive and place it there. Simiar to fake-a-lake but not the hassle of climbing under the boat to hookup and worry about failing off while running motor.
01-12-2011, 11:25 PM
This is pretty much exactly what I use:
$5 worth of parts from Home Depot or Lowes
Powered by vBulletin® Version 4.2.3 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.