PDA

View Full Version : Need Help Wiring!!



rjgaumer
11-27-2010, 11:22 PM
hi there guys, i have a 1800 watt kenwood amp and 2 10 inch punch dual voice coils subs. i would like someone help me with wiring them. i do not know a whole lot about ohms and stuff like that.

here is the link to the specs on my amp:
http://www.sonicelectronix.com/item_11795_Kenwood+KAC-9104D.html?utm_source=froogle&utm_medium=organic&utm_campaign=froogle

here is the link to the subs. i have 2 of them:

http://www.rockfordfosgate.com/products/product_details.asp?cat_id=4&series_id=31&family_id=10&item_id=108276&locale=en_US&p_status=

thanks!!!

MLA
11-28-2010, 10:47 PM
Wire each 2-ohm DVC sub in series, this will give you two 4 ohm subs. Then wire the two subs in parallel, this will give you a 2 ohm load at the amp for 900 watts rms.

cab13367
11-29-2010, 12:04 AM
Follow the link to your sub. Click on the wiring wizard tab. Follow the wiring configuration for two subs that results in a 2 ohm total load. This will deliver 450W rms to each sub so be careful with the volume since they are only rated 250W rms per sub.