K_E_N
08-03-2010, 04:39 PM
I know this has been covered a few times before. I've "searched" for forum postings and found a few suggestions, but still no good, reasonable, long-term solutions.
My platform is likely one of the worst out there. The holes in the part of the mount that attaches to the platform itself are so beat out that they have nearly worn through and created a slot in place of a hole. I've tried a few solutions, but have yet to find an adequate fix.
If anyone has re-engineered their swim platform bracket system, please post pics and a description of the fix. I'm working on some more ideas in my head and will post pics myself if I ever come up with a working solution.
I had rather not spend several hundred on new brackets from Moomba, folding brackets from OJ, or custom brackets from a machine shop.
My platform is likely one of the worst out there. The holes in the part of the mount that attaches to the platform itself are so beat out that they have nearly worn through and created a slot in place of a hole. I've tried a few solutions, but have yet to find an adequate fix.
If anyone has re-engineered their swim platform bracket system, please post pics and a description of the fix. I'm working on some more ideas in my head and will post pics myself if I ever come up with a working solution.
I had rather not spend several hundred on new brackets from Moomba, folding brackets from OJ, or custom brackets from a machine shop.