View Full Version : Tsunami 800 elbow adapter
Aquaholic
07-27-2010, 09:24 AM
Does anyone know if the 90 degree adapter on the Rule 700 ballast dump pump will work on a tsunami 800 or do I need to buy the one sold on wakemakers?
Aqua
moombadaze
07-27-2010, 09:34 AM
should be the same
cab13367
07-27-2010, 03:36 PM
Does anyone know if the 90 degree adapter on the Rule 700 ballast dump pump will work on a tsunami 800 or do I need to buy the one sold on wakemakers?
Aqua
Aqua,
If you buy the 800's from WM, they come with them. Otherwise, I didn't use the two that came with mine so if you want them, e-mail me your address and I'll send them to you for the cost of shipping.
Al
Aquaholic
07-28-2010, 09:25 AM
Cab, How did you attach the hose to the shorter threaded side? Was it a hose barb or did you attach it straight on with a clamp?
Aqua
cab13367
07-28-2010, 09:34 AM
Cab, How did you attach the hose to the shorter threaded side? Was it a hose barb or did you attach it straight on with a clamp?
Aqua
3/4 female thread x 3/4 hose barb bought from home depot. I wanted to minimize elbows to maximize flow rate so I went with a straight adapter instead of the supplied elbow.
Aquaholic
07-28-2010, 09:51 AM
Did you see the Tsunami 1200 had two styles? One was a NPT and the other is not, I wonder if other saw this and if there is 1 1/8 to 1 inch or down to 3/4 adpater.
Did you reuse the SC pump metal bracket with the 800?
Aqua
cab13367
07-28-2010, 01:52 PM
Did you see the Tsunami 1200 had two styles? One was a NPT and the other is not, I wonder if other saw this and if there is 1 1/8 to 1 inch or down to 3/4 adpater.
Did you reuse the SC pump metal bracket with the 800?
Aqua
I don't have any T1200's so can't comment.
I installed the T800's as fill pumps and did not use any brackets. I did not use them as replacements for the drain pumps as you are doing so can't help you with the bracket. Sorry.
Al
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.