View Full Version : Fuse Box location for 12v plug-in adapter??
I have checked all the wiring and no loose wires on the reset or the 12V plug in's, I know in other threads guy's have a loose wire or a short, can't find anything, is there something I am missing, has anyone run into this. I have a 2004 Mobius LSV.
Thanks for any advise.
Can anyone help me on this one. :D
Canuckle Head
07-23-2010, 05:18 PM
Do you have one of those test lights to see if you're getting any power to the adapter?
The rubber reset trips out after I push on it and will not allow power to the adapter. I've disconected and put back on all the terminals and all is tight. I think it is a short but have no idea where to start.
jmvotto
07-24-2010, 08:31 AM
test the terminals disconnected from the 12v outlet,the 12 outlet could be bad and causing the breaker to trip.
The rubber reset trips out after I push on it and will not allow power to the adapter. I've disconected and put back on all the terminals and all is tight. I think it is a short but have no idea where to start.
I still have not been able to fix this problem, can you buy the rubber resets some where? Both 12v adapters trip out even if you disconnect them both.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.