Fly high fitting removal?

[jester]

I have a fly high sac with a ¾ connection on it that I want to remove to put a 1” connection in its place. My question is how hard is it to remove and what should I do to install the new one?

[kaneboats]

I believe your buddies at Wakemakers will do this for you.

[viking]

Hair Dryer (not heat gun as it will melt the bag) on the part of the sac where the fitting is connected for 5minutes minimum (use a timer as it seems like infinity when your standing there). Then stand with your feet on both sides of the fitting right up against it and push the fitting forward away from where you heated it up. Should pop out.