View Full Version : loctite
04-18-2010, 01:46 AM
Do any of you put Loctite on the bolts to your bindings? If so what color do you use? I bought some blue and noticed (after I got home) that it was Permatex® Surface Insensitive Threadlocker BLUE and had a breakaway at 180 psi. I know this stuff will not work for what I need.
Having 2 bolts that would not stay tight I used blue locktite on them. Has worked out well.
I would be careful deciding on which "Locktite" to use based on color because Locktite is the name of a company and there are several companies making threadlockers and the bottles look alike. LockTite makes several types of thread lockers so I would suggest you visit their website.
After looking at the loctite products you could go either blue or green.
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.