mmandley
03-23-2010, 08:01 PM
I see several of you guys upgrading the Ballast and im starting to migrate to that direction as well now. I have been looking for the Rule 1800 pump used at the scupper. Where are you guys buying these at because i haven't had to much luck in finding them.
I'm planning on going with 5 T800 for draining my system but i want to double up my fill pumps.
Plan is get the 3 irritol valves people have been talking about.
T800 drain at both 750s, my 400 and 2 on my 650 Nose bag. <1 on each leg>
I plan to run both drain pumps from the nose out 1 threw hull next to the factory ski locker drain. Y them together, also have them set up to vent as well.
1 way check valve on both fitting in the drains on the bow to prevent air when driving on the highway.
Going to add Y connectors to both my 750s to allow them to vent as well into the drain.
Run a line form the ski locker bag to the Nose bag for filling. Once my 400 ski bag is full it will over flow to the nose bag.
I'm planning on going with 5 T800 for draining my system but i want to double up my fill pumps.
Plan is get the 3 irritol valves people have been talking about.
T800 drain at both 750s, my 400 and 2 on my 650 Nose bag. <1 on each leg>
I plan to run both drain pumps from the nose out 1 threw hull next to the factory ski locker drain. Y them together, also have them set up to vent as well.
1 way check valve on both fitting in the drains on the bow to prevent air when driving on the highway.
Going to add Y connectors to both my 750s to allow them to vent as well into the drain.
Run a line form the ski locker bag to the Nose bag for filling. Once my 400 ski bag is full it will over flow to the nose bag.