Activity Stream

3M makes some pretty good repair kits. Most vinyl cracks because it gets dried out and becomes hardened/brittle with time. Try to use some...

Small Business (probably a 1-man-band) produces a product claiming a Lifetime Warranty. Tough spot to get new orders out the door and do the work...

2016 Mojo Sent from my iPhone using Tapatalk

What year? Skiers stops making replacements after 5-7yrs so based on age you might have to find a local shop.

Brad, glad Ian responded finally. Sent from my iPhone using Tapatalk

I read the FBook post. Mentioned something about filling out warranty claim. Sent from my iPhone using Tapatalk

Only update is that I have emailed him twice since posting this and no response…I’ll move to FB and post..

Any updates? Ian is very responsive on the Supra/moomba facebook page. Just saw him respond fast with a life time warranty. Sent from my...

I have a 2015 Mojo. It is tight but being 23ft long everything is a little stretched out. I had about 8" from driplees seal to coupler. The...

After doing some digging around on Strut bearings mine look like they're in good shape. What kind of boat are you running? There sure is like No...

If you need help, reach out. Never broke a shaft but did have to remove everything you are to replace my dripless. Tim @ Glide helped me get...

Just to update. I called elberts and spoke with Brian. Very helpful and good pricing. Bought some tools that are designed to remove the coupler. It's...

Fantastic. I'm sure the dropstep, thrusters, e-pex tower, etc. all add extra weight also. 10k+ weight all full then add gear, fuel and people

Mojo and Makai also got about 800 lbs. in extra weight, about 300 lbs. dry weight and 500 lbs. in extra ballast.

The added weight is impressive on the Max. I was hoping to see this on the Mojo and Makai also. However, seeing the dropstep come to the Moomba line...

I like where Moomba has focused the upgrades on this Gen of the Max. Sent from my SM-S911U using Tapatalk

I can fix this for you. I had the same issue and had to MacGyver it on the water. From the top of the coolant reservior there is a small 1/4"...

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

New Max was live today. That boat started out in 2018 at 4500# dry weight and 3000# std ballast. Then later increased to 4000# ballast. This year...

I had what Zog had happen in my old boat, too. But if your impeller was fine, maybe it sucked up something else, or possibly just corrosion or some...

That large hose that comes ofF the thermostat housing is not hard or warm when the engine is up to temperature. I replaced the thermostat and no...

Not sure, the impeller that I removed was in perfect condition.

Could your heat exchanger be plugged? We were having issues with a separate boat and found impeller pieces in the exchanger, resulting in the over...

Still haven’t solved my overheating issue. Replaced both the fresh water impeller and the thermostat. Not sure where to go now. After replacing the...

If the v-drive is over filled, when it gets hot or under heavy load, the fluid can burp out of the vent on top. It's painted black and it a metal...