Activity Stream

I think Holdmybeer is right. I just changed the transmission fluid in an older boat this week and had the exact same thing happen. The fluid looked...

Appreciate the input. I’ll plan to run it for a few outings and then change the ATF again to see if there is any additional residue. Sent from...

I pulled some gunk out of mine when I first got it. I think these drive condensate a little running in cold water. The gray could be break in...

I haven’t noticed any slipping. I did have the FPP1-2 lower than expected error (SPN 91 PMI 18) at the end of last season. Service came out and...

Ever have any shifting issues or slipping? If the answer is no, I would run the boat a few outings and change it again to see what you find. I've...

Yeah, you can usually update the software on a 2014 Moomba LSV, but it depends on the system it’s using. For boats of that age, you might need to...

The Apisqueen kit seems like a solid option for the price, especially if you need that extra control in tight spots.

I’ve had something similar happen before, and I ended up needing a system reset. Try turning the boat off, disconnecting the battery for a few...

I would say give that a go on the water and see what happens! Sent from my SM-S721U using Tapatalk

Cut some off the downpipe at an angle which also better shows how much it's squeezed into an oval shape at the tip. Think it needs to be squeezed...

Man, that sucks about your GoPro. I’ve had something similar happen on a snowboarding trip, left the case open just slightly and it killed my camera...

Yea, I follow you if the screen is going in/out. Might be a long-shot but see if you can check the connections in the back. Try the...

Yeah, tried the battery and no change. Now it works about every 1 in 15 times and will come up with the standard screen. So the screen may just be...

He is probably going to say " oh we just used a magic eraser." LOL!!! Sent from my SM-G781V using Tapatalk

Thanks all. I don’t have cool tech unfortunately. I lightly scrubbed the area with the eraser and vinyl cleaner. I didn’t see any improvement...

I will see if I have some more pictures at different angles. It could just be the angle I took it at, but yours did look a bit deep. Sent from...

Agree with HAKNSLASH. I used that Starbrite cleaners on the previous boat (non-chill tech) and rinsed it very well. Then I let the sun do some...

I would not use magic erasers or boat erasers on any boat with cool touch material as it can sand away the cool tech coating.

Yeah I noticed the outlet was angled more straight down than the factory options. When building it I thought the factory ones were more subtle but...

Are you asking if 1) You can perform the update - not sure what type of port that year uses or 2) Does it have to go to a Dealer - I'm sure they...

at first glance I would be concerned about the bottom angle of the pipe. it looks like it's flat to the bottom of the boat. most of them I see have...

Looks good! The only thing I might notice is that the end of mine, factory, seems to be squeezed/elongated a bit more. But you will know if that...

Have you tried to disconnect your batteries for a period of time (5-10 mins) and retry? Might be worth a try. Otherwise, my guess it probably...

Sorry for the delayed response, work has been crazy. I’ll post more next time I can get to the boat. Give me another week.

Sure looks promising and a lot better on the budget. Got it saved to my amazon account now :)