Activity Stream

Going from a 14.25 to a 12 Would effectively raise my rpm 20% or so. Am understanding that correct? Similar to gearing in a truck. Sent from...

You are running so heavy...I would think 3500 easy.

This prop is almost identical in performance to the newer Supra 16x13.9. Under 5000’ elevation there was no difference in performance. Would make...

No. My buddy was helping. There are some automatic features I want to get used to for when it’s just the two of us. These things have come such a...

What do you think that would run my rpm at surf speed? Sent from my iPhone using Tapatalk

Yeah...15 x 12 is a 15 diameter prop and the 12 is the pitch. Pitch is inches traveled in 1 revolution. The smaller the number the more torque.

Disconnect the sub wires and measure the resistance of the sub. Should be 2 or 4ohms. If not it could have blown a voice coil and shorting out the...

I didn’t sleep very well last night as I was thinking about the lake today and props From my reading it looks like the 2419 for acme or 945 for...

sandm is right. The Napa, Autozone shock are typically Monroe generics and actually work well. Rancho are always too stiff and don't last in salt...

OJ and Acme both make a 15 x 12 if you think you need it. My 1235 did fine but I wanted to leave the hole a little faster and run 75% loaded while...

The boat won’t get to surf speed. Will achieve about 9.6-9.8 Putting the tab down helps lower the nose and get it to plane. Even with moving...

can't speak to rev8's but have had 2 boats with 4 icon8's and 1 with 4 rev10's. I HATED the rev speakers. always have and always will. they are...

I've never had an issue with the 1235's and running thousands of lbs in our z3's. close in length to your 242. granted when running fully ballasted...

sure there are lot of replies and opinions. I replaced all 4 on my old '00 f150 heavy half. I used the generic autozone replacements and put 10...

My son also had the same problem with his boat and bolt replacement helped him, but I don't know if it was the same detail or not.

Just ordered one! It's annoying as the driver & rider when you think the wheel is straight and it's not.

Cool man. Are you flying and driving? That can't be too easy. Sent from my SM-G781V using Tapatalk

Man that is great! You two keep the momentum going! She will be back in the water before faster than tou think!! Sent from my SM-G781V using...

1235 - 14.75 x 14.25 Based on your pic going to a 15" prop would leave clearance so no prop burn. However the 1235 should still allow you to...

According to OJ, looks like it’ll fit. The 950 is slightly more aggressive. I suppose the most aggressive I can get. That’s what I’m looking for ...

My 20 Mojo doesn’t have any significant air in the front when filled. If there is any air in the mid ship tank it vents into the bow sack. The bow...

I don’t have a tape measure with me currently. But I have about 2 1/2 fingers to the bottom of the boat. What kind of clearance do I need from hull...

Finally got a drone! Been wanting one for a while. It was the perfect day to test it at the lake today! I clearly need more practice driving it...

This is great news! Happy anniversary! Sent from my iPhone using Tapatalk

When I bought my boat second hand that bolt and the 2 bolts that mount the bracket together were all loose. I removed, added blue locktite,...

Can you go bigger diameter? I had the same prop on my Mojo. It's my spare now and I run an OJ 945 (15 X 13). With full crew, lead, etc. I'm almost...